【Daily Question】Chemical Engineering Principles 173: Equilibrium Moisture (September 15)
Thread Content
This post was last edited by “Back to Cambridge” on September 22, 2015, at 10:34. Starting today, the Chemical Engineering Theory section is launching the “Question of the Day” activity to help everyone reinforce their basic knowledge in chemical engineering. Subsequently, series such as “Fundamentals of Chemical Engineering”, “Mass Transfer and Separation”, “Chemical Thermodynamics”, and “Chemical Process Technology” will be introduced. We hope for your active support! For replies to the “Question of the Day” activity, answers can be viewed directly; however, the thread will be closed after one day! ! Participation earns 2 wealth points, with an additional 3 wealth points for correct answers. Fill-in-the-blank question: The equilibrium moisture level of non-absorbent materials such as yellow sand and porcelain clay is close to _______. 0
The equilibrium moisture of non-absorbent materials such as yellow sand and porcelain clay is close to __0__.
The equilibrium moisture of yellow sand and ceramics is close to 0. ---------------------------------------------------
The equilibrium moisture of non-absorbent materials such as yellow sand and porcelain clay is close to ____0______.
The equilibrium moisture of non-absorbent materials such as yellow sand and porcelain clay is close to ____zero_____.
The equilibrium moisture of non-absorbent materials such as yellow sand and porcelain clay is close to ___0__.
The equilibrium moisture of non-absorbent materials such as yellow sand and porcelain clay is close to ____0______.
Fill-in-the-blank: The equilibrium moisture of non-absorbent materials such as yellow sand and porcelain clay is close to _______. bound water
Fill-in-the-blank: The equilibrium moisture of non-absorbent materials such as yellow sand and porcelain clay is close to _______. Basically 0