Installation of steam drum
Thread Content
The design institute has suggested that the steam drum of the evaporation system be installed next to the indoor evaporator. Is such an installation location feasible? The pressure of the steam drum is 1.0 MPa.
It can be installed without problems according to the design; it has been taken into account, and if there are any issues, it’s the responsibility of the design team. Their design is feasible.
This is possible; I’ve seen designs like this before
If the steam users are concentrated in one area and the steam is supplied from the evaporation system in the same direction, locating the steam drum near the users can save costs related to pipes and pipe racks, as well as reduce the amount of work required for installation； This design is reasonable if the steam users are spread out and located in different directions supplied by the evaporation system. For your reference