How to pack the packing in a packed tower?
Thread Content
How to pack the packing in a packed tower?
Fillers come in organized forms and loose forms; the organized type is arranged in layers, both horizontally and vertically, while the loose type is poured from top to bottom.
I’ll give you the filler; there’s no need to teach you – you’ll know how to fill it in once you start
Our company didn’t know how to install the packing at first either; once the packing arrived, we immediately knew how to do it! ! ! ! ! ! ! ! ! ! !
The packing in the sulfuric acid dry scrubber is in a loose pile
Haha, the Pall ring inside the scrubber tower – just pick it up and pour it directly into the tower
Different filler plans are developed depending on the type of filler, and the tower is also specially designed to facilitate the installation of the filler
Ask where you bought the filler, or you’ll know as soon as you see it
It is best to add water to the bulk filler before pouring it in, as this makes it less likely to break
Fillers come in organized forms and loose forms; those in organized forms are pre-assembled according to the design drawings to check whether the dimensions are satisfactory, while those in loose forms are poured from above.
Open the manhole, use a bucket to collect it, and lift the filler to the manhole with a crane.