One question per day; those who answer correctly receive 6 wealth points, while participants receive 2 wealth points； Question 324
Thread Content
Fill-in-the-blank: The vapor temperature control of the VC aftercooler in vinyl chloride screw compressors should be set at a level that prevents liquefaction; the compressor oil pressure should be maintained at ( ). Answer: Greater than 45 degrees, 0.1～0.15MPA
Newcomers can get bonus rewards; the temperature should be around 5°C, and the oil level should be at least half of the gauge’s maximum.
80 degrees Celsius. 0.1--0.15MP.......................
The control of the vapor phase temperature of the VC aftercooler in vinyl chloride screw compressors (＞ 47 ℃) prevents liquefaction, and the compressor oil pressure should be maintained at (0.1–0.15 MPa).
The control of the gas-phase temperature of the VC aftercooler in vinyl chloride screw compressors (＞47°C) prevents liquefaction, and the compressor oil pressure should be maintained at (0.1–0.15 MPa).
The control of the gas-phase temperature in the VC aftercooler of vinyl chloride screw compressors (>47 ℃) prevents liquefaction, and the compressor oil pressure should be maintained at (0.1–0.15 MPa).
The control of the vapor phase temperature of the VC aftercooler in vinyl chloride screw compressors (above 45 degrees) prevents liquefaction; the compressor oil pressure should be maintained at (0.1–0.15 MPa).
Greater than 45 degrees, 0.1～0.15MPA
Greater than 45 degrees, 0.1～0.15MPA