Installation direction of horizontal water pumps?
Thread Content
Multiple horizontal water pumps need to be installed against a wall inside a room. Generally, is it the motor that should be placed closer to the wall? Should the pump body be placed closer to the wall? Are there any relevant installation and acceptance standards?
It’s better to place the pump body closer to the wall, as this meets the usual requirements for on-site installation and maintenance
There are no specific requirements; as long as it facilitates installation and maintenance while meeting the technical specifications. It’s better for the pump body to be against the wall.
Surely, the pump body should be against the wall, so that it’s easier to service the motor from the outside.
It mainly depends on the type of pump; in most cases, it’s convenient to have the motor placed against the wall.
There are no regulations, but maintenance space must be taken into account
It depends on the size of your pump. If lifting is done using a crane or a hoist, the main things to consider are the coverage area of the crane or hoist arm, as well as the positioning required during lifting. When we do the design, we usually ask the lifting engineer from the construction company to help review the 3-D design to ensure there is enough maintenance space. For small pumps, only the space needed for disassembly and assembly during maintenance needs to be considered. As for whether the motor or the water pump should be against the wall, it’s not a problem at all.