Seeking help: What drawings should be attached when preparing a special section on occupational health for construction projects?
Thread Content
This post was last edited by slll611 on 2016-1-22 at 20:46. I’m seeking help from fellow sailors – I need to prepare a section on occupational health for a construction project, and I’m not sure what drawings should be attached
This post was last edited by ylb913 on 2015-10-11 01:54. In response, based on the illustrations included in our design documents related to this installation, the following is provided: 1. Area location map (i.e., the overall plant layout, or a partial plant layout showing the locations of the relevant plant boundaries); 2. Equipment layout plan (for this installation). 3. Plan layout diagram of flammable and toxic gas detectors (for this device)
If the building is equipped with mechanical ventilation, a layout diagram of the ventilation system should also be provided； Layout diagram of air conditioning and heating system facilities where heating is required ； Facilities equipped with corrosive materials should be fitted with eye wash and shower stations, along with a layout diagram of these facilities.
It is also necessary to attach the main process flow diagram and the map showing the distribution of major occupational disease hazards