Butene recovery compressor
Thread Content
For the technical upgrade, a butylene recovery compressor is needed – a reciprocating type that can compress the gas from 0.35 MPa to 2.2 MPa; after compression and cooling, butylene is recovered, with a butylene content of around 60% (by volume), while the remainder is nitrogen. Under normal operating conditions (temperature of 17°C), the gas flow rate is 60–70 m3/h. No suitable manufacturer for such a compressor has been found. If anyone here has experience using such compressors, please help by recommending some manufacturers. Thank you!
How is it possible not to find a manufacturer? Is the traffic too low? It’s enough to find a reciprocating machine; there are countless manufacturers available to search for
Too low flow rate is one reason; the presence of condensate is another
If the gas capacity is low, our company’s D-diaphragm compressors can be used; however, condensate is difficult to handle
It is recommended to contact Haution; they have a circumferential flow compressor that is based on Haution’s proprietary technology. Last year they came to our company for a technical exchange, and regarding the issue of liquid content in our recycled gas, they recommended this type of compressor; the advantage is that there is no need to install liquid separation tanks or buffer tanks at either the inlet or outlet. But your compressor is a bit too tall. You’d better ask.
This post was last edited by zxf760718 on 2015-10-31 08:20. You can send me the relevant parameters and I can help you with them. Private message within the site