How to treat methanol wastewater at 8000 ppm?
Thread Content
As the title suggests, can activated carbon be used? What is its effectiveness?
This post was last edited by mikeding on 2015-10-22 08:58. It should be treated using an anaerobic reactor. Alternatively, methanol can be recycled; contact qq874941228 for detailed information. We have multiple sets of equipment for IC, EGSB, ABR, and UASB in operation.
With a COD level of around 10,000, it can be essentially completely degraded through aerobic treatment.
If the water volume is high, anaerobic + aerobic treatment is used, enabling the effluent concentration to be reduced to below 50 mg/.
Using activated carbon is not suitable; it is too costly and does not guarantee complete adsorption.
You can also try using activated carbon for adsorption in the following experiment.