Loading of light oil products
Thread Content
Dear sea friends, how can we minimize losses during the loading of light petroleum products in summer?
Loading in a sealed manner would be much better. As for the emission of oil and gas, an oil and gas recovery system can be installed later on
Underwater oil filling + oil and gas recovery. . . .
Lower garments are used, with vapor pipes to ensure a sealed loading process; oil and gas recovery can also be implemented.
Actually, having an oil and gas recovery device should be sufficient. All the volatile light components have been recovered, so there is no loss.
Whether it’s a train or a car, large or small transfer hoses – the processing techniques used by many manufacturers for sealed loading are not yet mature enough to ensure a proper seal. . . . . . .
Load in a sealed container. It can be installed from the top or from the bottom. Add gas-phase recovery. If loading is done through an open top hopper, a gas collection plate can be installed on the hopper, or a vapor recovery cone can be fitted over the opening.
Load it in a sealed container; gas recovery is sufficient, and many are being modified in this way these days. We can discuss it on QQ at 2453597459