Drying tower
Thread Content
Calculation of the water absorption capacity of the drying tower: air intake volume of 60,000, acid absorption at 93%. Help needed
The last edit to this post was made by hnfxl689 on 2015-10-23 at 14:42. Regarding the amount of water absorbed by the drying tower, it depends not only on the volume of gas flow, but also on factors such as temperature and atmospheric pressure; different temperatures correspond to different saturated vapor pressures of water. It makes a difference whether it is dry air or flue gas that is dried in the dryer; whenever you discuss something, make sure to clarify your conditions.
Agree with the opinion of 701600; the conditions for the problem are incomplete
You should at least tell the gas temperature ahead so that an estimate can be made