LNG flare system
Thread Content
What are the components of the flare system in an LNG liquefaction plant? What are the components of torch gas?
This post was last edited by Refiner on 2016-3-3 15:00. The components of LNG are whatever they are. CH4 C2H4. . . . . Nitrogen. . . . It is also possible that hydrogen sulfide will be present
The components of a torch include the ignition plate, perpetual flame, burner, LPG tank, and combustion control system. Torches can also be classified as overhead or ground-mounted: victory:
Separation tank, water seal tank, ignition control system, steam purging system, burst disc, flame arrester, flare, permanent light. Battery valves, pneumatic valves.
In an ignition system, there are usually associated gas, instrument gas, and fuel gas. I would like to know the function of each type of gas
All sea friends are welcome to actively participate in the discussion.
The LNG flare system has been explained in detail by colleagues earlier; it is similar to conventional flares. The release of gases is primarily aimed at ensuring the safe release of NG in the event of an accident, as well as facilitating the emergency release of BOG due to insulation failures or localized malfunctions.
The control system used in the torch system could also be explored. Siemens PLCs are widely used. Are there any good domestic options?
Separation tank, water seal tank, ignition control system, steam purging system, burst disc, flame arrester, flare, permanent light. Battery valves, pneumatic valves. Regarding this liquid separation tank, some are further divided into ones for gas and ones for acidic gases; they are separate from each other, and the combustion ports at the top are also not the same.
Typical burners use multi-stage combustion in groups.