What is the difference between a safety barrier and an isolation barrier?
Thread Content
Intrinsic safety signals are equipped with safety barriers in the DCS, while analog signals related to the MCC are fitted with isolation barriers. Want to know the difference between safety barriers and isolation barriers?
Safety barriers include Zener barriers and isolation barriers.
Are you asking about a safety barrier or an isolation barrier? This question is wrong in itself; an isolation barrier is a type of safety barrier. Safety barriers are generally divided into Zener barriers and isolation barriers.
The DCS cabinet is located in the safe area, and the MCC electrical cabinet that receives the AO frequency conversion signals from the DCS is also situated in the safe area. Therefore, there is no need to consider the explosion-proof type of this signal. If a barrier is indeed used, it is actually employed merely as an isolator, taking advantage of its isolation function; this approach does not involve using it as a safety barrier.
An isolation barrier is a type of safety barrier. Safety barriers are generally divided into Zener barriers and isolation barriers.
An isolation barrier is a type of safety barrier. Safety barriers are generally divided into isolation barriers and Zener barriers.
Simply put, a safety barrier isolates unsafe signals to prevent them from entering the safe area, while it also isolates external interference signals so that they can reach the instruments.
A barrier is a type of safety barrier. Safety barriers are generally divided into Zener safety barriers and isolated safety barriers. The main component of a Zener safety barrier is the Zener diode, also known as a voltage-regulating diode. The explosion-proof principle of the Zener safety barrier is to use Zener diodes to control the output voltage and resistors to limit the output current, resulting in a relatively simple circuit. The isolation safety barrier uses high frequency as the fundamental wave to modulate and demodulate the signal; any changes in the signal will affect the accuracy due to the effects of the safety barrier circuit.
The answer given on the 8th floor is the most detailed and accurate