Discussion on the location for adding ammonia water in the desulfurization tower
Thread Content
For the desulfurization agent in the desulfurization tower, is it better to add 20% ammonia solution directly into the tower or from the outlet of the mixing pump? Which method results in less ammonia leakage and higher utilization efficiency?
It is better to add it to the reaction tank to ensure uniform mixing
Could you send the flowchart? 20% is the chemical; it needs to be diluted in the circulating liquid. Since it is volatile, proper pre-cooling is necessary, and the inlet should be at a low level. If possible, an additional layer of process water spray can also be used