Regarding the Cs137 dosimeter
Thread Content
The medium flowing through the DN125 pipes in our company is slurry, and a Cs137 concentration meter is being used for measurement. The concentrations obtained so far are a bit high. I would like to ask experienced colleagues how to adjust this situation; I don’t have much knowledge regarding Cs137 concentration meters. Thank you
Use a radiation gauge to see if the pipeline compensation can be adjusted! I only have a CS137 radiation level gauge here, but the principle should be the same!
Hello, I am the manufacturer of nuclear concentration meters. As long as the test results are accurate, any deviations are likely due to hardware issues that cause fluctuations in the measurements. I can send you the user manual; you can contact me via QQ at 735897028. I hope this can help you!