I also encountered issues with generating ISO diagrams in CII2013
Thread Content
It can’t be a problem with the cracked version, right? I hope someone experienced can give me some advice to help me solve this problem~ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Message fields for F: \ lock \O Spitfin Bream 9 Y0 9 2 9 \ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Personal ISOGEN: VERSION 8.1.0 (Full) *** IDFGEN VERSION 9.1.0 (Build 12) *** File being read: ISOGEN.PCF Processing PIPELINE-REFERENCE: PEIXUN22 All components are connected. ISOGEN VERSION 11.1.0 (Build 30) **** ISODAT **** Start of drawing PEIXUN22 – attempting to split this line into 3 separate drawings. The pipeline has been split into 4 drawings. Output stage of drawing PEIXUN22 **** ISOPLOT **** DRG 1 shaped, DRG 2 shaped, DRG 3 shaped, DRG 4 shaped. The following drawings are in the plotfile: F:\ISO\IsometricProject\IsometricStyle\Drawings\PEIXUN22.DWG. DRG 1 is a simulated version of DRG 1 /PEIXUN22. The following drawings are in the plotfile: F:\ISO\IsometricProject\IsometricStyle\Drawings\PEIXUN22A.DWG. DRG 2 is a simulated version of DRG 2 /PEIXUN22. The following drawings are in the plotfile: F:\ISO\IsometricProject\IsometricStyle\Drawings\PEIXUN22B.DWG. DRG 3 is a simulated version of DRG 3 /PEIXUN22. The following drawings are in the plotfile: F:\ISO\IsometricProject\IsometricStyle\Drawings\PEIXUN22C.DWG. DRG 4 is a simulated version of DRG 4 /PEIXUN22. ***** POD errors ***** SMART DWG: Conversion failed – unknown SMARTDWG error. The conversion failed; although a DWG file was created, opening it results in an error message indicating that the file is invalid! Why is the path on drive F showing garbled characters? Is it related to that?
It should be a cracking issue. I’m the same; using the legitimate version works well, while the cracked one gives errors. That being said, CII’s ISO functionality is not very good, so it’s not recommended for use.
So, to specify the pipe rack load for civil engineering, one will have to add the annotations manually on the ISO diagram, right? With too many software programs, one becomes lazy and wants everything to be done instantly. . . I previously searched on HaiChuan for posts about issues with image generation; some said it was a problem caused by the cracked version, while others claimed that using the cracked version worked well and allowed image generation. I had no idea whether it was indeed due to the cracked version or not, and didn’t know who to believe~:L