Temperature control in Unipol fluidized bed polypropylene reactor
Thread Content
Temperature control in Unipol fluidized bed polypropylene reactors: the designed value for PDP is 70 degrees Celsius; recently, some units have had their temperature controlled at 80 degrees Celsius. Let’s discuss the effects of raising the temperature by 10 degrees on control systems and the properties of the polypropylene powder
Temperature control in the polypropylene fluidized bed process is actually a range; it is generally between 65–70°C, with adjustments made depending on the product. The general control is still at 70+/-1°C. I don’t know which device the original poster is referring to What is the grade of the product being manufactured? What catalyst is used?
I’m not sure about the details; it’s enough to know that. Someone mentioned it during a meeting in Hangzhou, but I didn’t have time to ask further
This post was last edited by Really on 2015-12-8 09:48. For diether electron-donating catalysts, a reaction temperature of over 70 degrees is recommended. . Maximum activity can be achieved.
The UNIPOL process generally uses catalysts from the patent holders. Are there any domestic plants that use domestically produced catalysts on a long-term basis? What is the grade produced?
The diether catalyst from Basell Corporation has been tried.
T30 hosts SHAC201
You can follow a WeChat official account called Jiaoxuesheng; it has many people working in the adhesive industry and related fields, so there’s plenty of opportunity for communication. I hope this will be helpful to everyone:lol:lol
Higher temperature leads to higher activity, but too high an activity can easily cause runaway polymerization. . If the catalyst is replaced, it needs to be adjusted according to the parameters provided by the catalyst manufacturer.