Two multiple-choice questions on rescue?
Thread Content
Two multiple-choice questions on rescue: 1. For pressure vessels installed within the country that use materials from abroad, the material manufacturing enterprise shall pass the ( ) in accordance with Article 1.9 of the vessel regulations. **The General Administration of Quality Supervision, Inspection and Quarantine has appointed (relevant technical organizations or institutions) as evaluation bodies; entities can submit evaluation requests directly to ( ). 2. In principle, the assembly of pressure vessels in a different location shall be supervised and inspected by the inspection agency at the site of use, which shall issue ( ), ( ) ； Upon agreement, supervision and inspection can also be carried out by ( ), in which case a single supervision and inspection certificate can be issued. Please offer some guidance and indicate the source. Thank you!
I was wrong; it should be a fill-in-the-blank question.
1. For pressure vessels installed within the country that use materials from abroad, the material manufacturers must undergo (technical evaluation) in accordance with Article 1.9 of the vessel regulations. **The General Administration of Quality Supervision, Inspection and Quarantine has assigned (relevant technical organizations or institutions) as evaluation bodies; entities can submit evaluation requests directly to (**General Administration of Quality Supervision, Inspection and Quarantine**). 2. In principle, the assembly of pressure vessels in a different location shall be supervised and inspected by an inspection agency at the site of use, which shall issue a supervision inspection certificate; (together with the manufacturing supervision inspection certificate, this serves as the supervision inspection certificate for the vessel) ； Upon agreement, supervision inspection can also be carried out by the inspection agency located at the site of the pressure vessel assembly unit; in this case, a single supervision inspection certificate can be issued.
Dear moderator, in which book did you find question 2? Thank you!
It should be fixed in place for the supervision of pressure vessels.
Relevant provisions can be found in the Safety Inspection Regulations for Fixed Pressure Vessels, TSG R0004-2009