Material selection
Thread Content
Please help choose the materials for the equipment. The medium is sulfuric acid at 85–90% concentration, along with various organic substances and water; the proportions of these components are 5–8% and 3–5% respectively. The operating pressure is 0.6 Mpa, and there is a negative pressure during the production process, around 1 M water column. The material must be able to withstand temperatures of 250 degrees as well as temperature fluctuations. The volume of the equipment should be 8 m3; it should use heat transfer oil for heating via coiled tubes, and it must be equipped with agitators. After the reaction, the material turns into a solid, and the agitators need to be capable of stirring it. This is an intermittent operation. Please select material
I’d like to know that too. Can I get in touch? My QQ is 406738618 (please mention Hai Chuan**hai)
I’d like to know that too. Can I get in touch? My QQ is 406738618 (please mention Hai Chuan**hai)
Enameled equipment can protect against corrosion by acidic substances, but its strength is not very good, making it prone to damage. I believe it is best to use a carbon steel casing with an inner lining of enamel coating or enamel glass fiber cloth; this approach ensures sufficient strength while also providing protection against corrosion.
The best material for zirconium composite plates! 13891754135