Seeking help with guided wave radar level gauges
Thread Content
A fault occurred in the guided-wave radar level gauge at the unit. During maintenance, it was found that there was a pipe right above the gauge’s flange, and the distance between them was too small, making disassembly and repair difficult. How should it be modified? This container is a pressure vessel.
This post was last edited by Qiu Gege Baqi on 2016-1-8 at 13:20, using a cable radar. . . Or replace the mounting port. . .
If there are no other testing ports available, then the only option is to modify the pipes; there’s no need to worry about it. After all, no one checked the level gauge when the pipes were installed.
Which brand is it? For some products, the radar head and the antenna are separate; they can be taken apart – you can remove the head. The cable usually doesn’t present any problems