Selection method for stainless steel mesh belt conveyors

Thread Content

Selection method for stainless steel mesh belt conveyors in belt conveyor systems. Selection method for stainless steel mesh belt conveyors: 1. First, determine the temperature, humidity, and corrosivity of the operating environment, and use this information to select the appropriate material for the mesh belt, as well as the wire diameter and strength of the conveyor frame. II. It is necessary to know the shape and size as well as the density of the material being transported; the appropriate mesh parameters are selected based on the shape, while the load capacity per unit area is calculated using the density. Based on this, the wire diameter of the conveyor belt, the strength of the support rods, and the size of the chain (not applicable for roller-driven systems without chains) are determined. III. There is a direct proportional relationship between output and speed; the output is calculated by considering the total load capacity and the conveying speed, with a target output of 150% being advisable. IV. Motor power and speed ratio: Based on the total load capacity and the torque required by the motor, the appropriate motor power and speed ratio are determined, with a value of 150% of the required level being advisable.