Analysis of the software HTRI
Thread Content
1. The physical properties of the hot(cold) fluid have been extrapolated beyond the valid temperature range. Check the calculated values. The temperatures obtained through the extrapolation of the fluid properties for hot(cold) fluids exceed the applicable temperature range; therefore, check the calculation results. After running it, only this problem occurred. How can everyone solve it?
The translation is incorrect; please translate again.
Thank you, no need to translate it. I figured it out – as long as the fluid is selected in the system, its properties will be generated automatically, and such problems won’t occur. If the property parameters are entered manually, it’s fine if such problems arise; they can be ignored.