What are the boiling ranges of 1,2-anthracene oil respectively? Thank you
Thread Content
What are the boiling ranges of 1,2-anthracene oil respectively? Thank you
Anthracene oil No. 1: 300~330 Anthracene oil No. 2: 330~360
I would like to ask: does \"mono-anthracene oil\" refer to the oil containing a single anthracene unit, and does \"dio-anthracene oil\" refer to the oil containing two anthracene units connected by a single bond?
Who bothers to test dianthracene oil these days? It’s simply mixed with anthracene oil and sold as is. As long as the anthracene oil parameters are satisfactory, that’s fine
It’s just crude anthracene, a mixture that requires further processing.
Market demand does not place much emphasis on the classification of anthracene oil; the main consideration is the boiling range. Generally, meeting the market demand between 300 and 360 is sufficient
The focus is on the process; flash oil and diphenanthrene oil are not analyzed separately. For the anthracene oil obtained by mixing diphenanthrene and monophenanthrene, a value of less than 10.36 at 300 degrees and greater than 50 at 10.36 degrees is sufficient. If these requirements cannot be met, the mixing ratio can be adjusted.