Compressor housing drainage
Thread Content
Dear sea friends, for two centrifugal compressors connected in series, the inlet pressure of the first compressor is 45 kPa (absolute pressure). The outlet pressure is 60 kPa (absolute pressure). The inlet pressure of the second compressor is also 60 kPa (absolute pressure), while its outlet pressure is 78 kPa (absolute pressure). The condensate water from the casings of these two compressors can be drained into a negative-pressure tank simultaneously, and then removed using a pump. Is this approach feasible according to Haiyou’s guidelines?
What you have is equivalent to a multi-stage compressor; it should work fine
Won’t there be any voltage straying?
Our factory doesn’t have such equipment, but as long as the tank isn’t full, it should work. Ask other people for advice to avoid mistakes.