Weighing equipment safety valve connector
Thread Content
For devices equipped with a weighing module, the connection pipes usually come with a section of hose, but what about the safety valve on the device – should there also be a hose connected to it, either at the inlet or outlet? It seems a bit strange. I wonder if anyone has encountered a similar problem
Use a hose for the outlet; the pressure on the inlet is high. @WisdomBright @ChemicalWorkerTalks @IceQueen
Imported flange connection, export metal hose connection.
I’ve never seen it before; considering increasing the use of metal hoses for export might be a good idea. Metal hoses are commonly used in the chemical industry abroad, and their purpose is to prevent excessive pulling forces – having metal hoses in place can solve the problem. What remains are the practical and aesthetic considerations that one needs to think about.