【Daily Question】 Hydrogenation Sector 2016-03-21 Fill-in-the-blank question
Thread Content
This post was last edited by zls1457 on 2016-3-21 09:22. [Daily Question] Hydrogenation sector – 2016-03-21: Fill-in-the-blank questions. The distillation section refers to the part of the distillation tower from the feed inlet up to the top of the tower, while the stripping section refers to the part from the feed inlet down to the bottom of the tower. @Guan Gongyu @xuyuan0206 @TraceElements @guoruimin1986 @stone2000 @sgwj
The rectification section is the part above the feed, while the stripping section is the part below the feed.
The rectification section refers to the area above the feed, while the stripping section refers to the area below the feed.
This post was last edited by zhaozq2015 on 2016-3-21 08:00: the section from above the distillation tower’s feed inlet to the top of the tower, and the section from below the feed inlet to the bottom of the tower
With the feed plate as the boundary, the area above the feed plate is the distillation section; the function of this section is to increase the concentration of the volatile components in the feed material
There must be a mistake in the question; it should ask about the distillation section and the stripping section. In the vapor phase rising above the feed plate, the heavier components continuously condense and separate, while the lighter components in the vapor phase become increasingly pure – this section is known as the distillation section. In the liquid phase beneath the feed plate, the light components are continuously vaporized and separated, while the heavy components in the liquid phase become increasingly concentrated; this section is known as the stripping section.
Above the feed plate, the heavier components in the rising vapor phase continue to condense and separate, while the lighter components in the vapor phase become increasingly pure; this section is known as the distillation section.
Above the feed plate, the heavier components in the rising vapor phase continue to condense and separate, while the lighter components in the vapor phase become increasingly pure; this section is known as the distillation section. In the liquid phase beneath the feed plate, the light components are continuously vaporized and separated, while the heavy components in the liquid phase become increasingly concentrated; this section is known as the stripping section.
Above the feed plate, the heavier components in the rising vapor phase continue to condense and separate, while the lighter components in the vapor phase become increasingly pure; this section is known as the distillation section. In the liquid phase beneath the feed plate, the light components are continuously vaporized and separated, while the heavy components in the liquid phase become increasingly concentrated; this section is known as the stripping section.