【Daily Question】April 30, 2016
Thread Content
To increase the popularity of the purified area, a \"One Question per Day\" campaign was launched to foster an active atmosphere for technical exchanges while also providing financial rewards to users. (Fellow sailors, if you have any good questions, feel free to send them to me; let’s work together.) 【Daily Question】 (Fill-in-the-blank) Principle of load addition and reduction control in the system: When increasing the load, first increase the methanol circulation rate and then increase the gas volume ； To reduce the load, first decrease the gas volume and then reduce the circulation volume. Post your answer as a reply; participating in the quiz earns you +2 wealth points. Getting all answers correct adds another +3 to +8 wealth points. If you provide a thorough analysis and explanation of the questions or answers, or include detailed calculation processes, you will receive additional wealth rewards. If your answer is correct and your analysis and explanation are accurate, it will be marked as the best reply (or the best assistance). Feel free to answer the questions.
Principles of load addition and reduction control in the system: When increasing the load, increase the circulation volume first, and then the gas volume； To reduce the load, first decrease the gas flow rate and then the circulation volume.
Operational prerequisites for adjusting temperature, pressure, etc. of materials
Principles of load addition and reduction control in the system: When increasing the load, fuel should be added first, followed by air ； To reduce load, first reduce air, then reduce fuel.
Increase the load: first increase the [circulation volume], then increase the [air volume]； During load reduction, first reduce the [gas flow rate], and then reduce the [circulation volume].
When increasing the load, first increase the gas volume and then increase the circulation volume; when reducing the load, first reduce the gas volume and then reduce the circulation volume
This post was last edited by wangld on 2016-4-30 08:34: Methanol circulation rate, gas volume； Gas volume, methanol circulation volume
Principles for load addition and reduction control in the system: When increasing the load, first increase the methanol circulation rate and then the gas volume ； To reduce the load, first decrease the gas volume and then reduce the circulation volume.
This post was last edited by zwg2006 on 2016-4-30 17:01. Increasing load: first increase the methanol circulation rate, then increase the gas volume； Load reduction: First reduce the gas flow rate, then reduce the circulation volume.