Can saturated sodium chloride solutions with a temperature of less than 100°C and a pressure of less than 0.6 MPa be transported using fiberglass-reinforced plastic pipes?
Thread Content
This post was last edited by zhaoqingsheng on 2016-5-30 09:55. Can saturated sodium chloride solutions with a temperature of less than 100°C and a pressure of less than 0.6 MPa be transported using fiberglass pipes? If possible, what are the requirements regarding the material and properties of fiberglass-reinforced plastic pipes?
Using fiberglass-reinforced plastic at 0.6 MPa is a bit questionable; FRPP, which is made by winding glass fibers and then heat-sealing them, might work for reinforcing with glass fibers, but this requires the contractor to have relevant experience.
Hebei Yaxing Fiberglass Reinforced Plastic Co., Ltd. 15230732858
I’m sure you’ll be blocked in a moment, hehe
Recommendation: 1. Steel-lined PTFE pipes are not resistant to negative pressure. 2. Linered with PTFE coating for resistance to negative pressure. The prices are about the same.
Carbon steel + polyaniline is sufficient; the results are excellent