RTO design
Thread Content
The air volume for VOC treatment is 40,000 CMH, and the concentration of waste gas is 60 mg/m3. How can we calculate the size of the RTO, the amount of gas required, and the residence time? Speed, etc., thank you! If the concentration factor is 20 times, then
A concentration of 60mg/m3 for such exhaust gases is already very low; the standard set by GB16297-1996 is 120mg/m3, so this level is almost within the allowable emission limits. Are there any other criteria to consider?
Generally, zeolite wheel concentration is carried out first, followed by thermal desorption and then burning in a incinerator
The emission standards from 1996 are no longer suitable for VOC emissions; local standards are now being used instead
Well, indeed, regulations are becoming stricter in many places. Also, your question is too specific; it will likely require a technical solution, so I suggest contacting the manufacturer directly
We’re having a meeting this afternoon to discuss this issue; let’s see if it’s possible to avoid copying any materials
In current cases, which companies are generally more reliable for RTO?
We have worked together with Dur, EnGuo, etc.; it should be fine
After concentration, there are only a few thousand left – it’s too little