Selection issues for centrifugal fans
Thread Content
During the process of adding activated carbon, a large amount of dust is generated, so dust removal is necessary. The area involved is 0.2 m2, and the filters used are 500-mesh cloth filters. The air flow rate is 1700 m3/h. What would be the approximate total pressure required for the fan? It’s also important to ensure that the noise level does not exceed 60 decibels
Take a look at the filtration efficiency rating of the filter, as well as the general layout of your system, and then I’ll tell you the fan pressure
It’s already chosen; thank you. The problem is that the noise is too loud