DN500 angle valve
Thread Content
I have 5kg of low-pressure steam, and the space available is limited; I want to use a DN500 angle valve, but the information available shows that the largest size available is DN400. What should I do?
Add variable diameter, okay? Similar to the diameter changes before and after the flow meter.
For the technical upgrade project, the timeline is tight; there’s no time. Non-standard items are also expensive, exceeding the budget.
The owner does not allow diameter reduction. I originally wanted to add an 8-character blind plate to cut it off directly, but the owner didn’t approve it.
Then the only thing to do is ask the manufacturer if they can do it~
The pressure difference should also not be large; then why use an angle valve?
DN500 angle valves can be manufactured by our factory.