What are the factors that cause the rubber coating on rollers to lack wear resistance?

Thread Content

The main factors contributing to the poor wear resistance of the rubber coating on rollers are as follows: 1. Rubber material – The type of rubber is a crucial factor in determining the wear resistance of the roller coating; the performance parameters of the rubber affect the quality of the coating. Therefore, it is necessary to choose rubber that meets the requirements of industrial and mining applications. The rubber coatings available on the market are mainly of imported or domestic origin; for general industrial and mining conditions, domestic rubber is often used, while in situations with harsher conditions, highly wear-resistant imported rubber sheets are preferred. 2. Insufficient bonding strength: During the use of the drum, it is often subject to prolonged friction and centrifugal forces. If the adhesive used is not capable of providing effective bonding, it can lead to premature delamination of the drum, resulting in the shutdown of the system. 3. Selection of solution: The manufacturer chosen must possess strong capabilities in on-site analysis and construction. Adhesive sheets with different thicknesses, hardness levels, and wear resistance should be selected based on actual conditions; an unsuitable choice often leads to rapid wear of the adhesive coating on the drum.