When an intermediate warehouse is installed in a factory building, the storage capacity for Class A and Class B intermediate warehouses should not exceed the amount needed for one day and one night. What does this mean? ?
Thread Content
According to building codes: when an intermediate warehouse is installed in a factory building, for Class A and Class B intermediate warehouses, the storage volume should not exceed the amount required for one day and one night. What does this mean? ? 1. The factory building was originally classified as Category C; will the entire building become Category A after a Category A intermediate warehouse is installed there? 2. Can Class A storage tanks be used? Are Class A storage tanks considered intermediate warehouses? How is the 3/1 daily dose defined? Is it okay to exceed it? Because it wasn’t written properly.
Stock as much as you will use within 24 hours on-site; Class A chemicals cannot be stored in Class C warehouses
Sir, which provision is being referred to? Why can’t Class A chemicals be stored in Class C buildings?
According to the building fire protection design codes, Class A chemicals are to be stored in dedicated warehouses. If Class A chemicals can be stored in Class C warehouses, then what’s the need for separate warehouses designated for Classes A, B, C, D, and E? ? ?
The 24-hour amount of hazardous chemicals stored and used in the factory building is based on the usage site. Quantity of hazardous chemicals stored.
Class A hazardous chemicals are flammable and explosive; has your Class C warehouse ensured that all electrical equipment is explosion-proof?
Class A hazardous chemicals are flammable and explosive; has your Class C warehouse ensured that all electrical equipment is explosion-proof?
Class A hazardous chemicals are flammable and explosive; has your Class C warehouse ensured that all electrical equipment is explosion-proof?
Class A hazardous chemicals are flammable and explosive; has your Class C warehouse ensured that all electrical equipment is explosion-proof?
Class A chemicals can be used in Class C factories； However, Class A intermediate warehouses cannot be built in Class C factories
This needs to be calculated based on the storage volume and floor area; refer to the building codes! If neither exceeds the limit, it can be considered not a Class A item!