Fire protection recommendations or fire safety inspection certificates for chemical industry renovation projects
Thread Content
For established companies that change their product lines every few hours, what is the procedure for conducting inspections or obtaining feedback regarding fire safety? Thank you!
It should also be registered, following the principle of \"three simultaneities\" for fire protection facilities”
If modifications are indeed made to an existing building, it is still necessary to go to the fire department to file the relevant changes. Three forms are required: 1) Record of inspection and supervision of fire protection products, 2) Registration form for the use of fire protection products, and 3) I can’t remember the name of the third form. There is also an A3-sized drawing that lists the name of the individual building. If the legal representative of the company does not handle the procedures in person, a power of attorney for fire safety inspections is needed; this process is quite simple. Next is the preparation of the drawings: completion drawings for the fire protection facilities are required, along with a stamp verifying their completion. These drawings must be taken to the fire department’s reception desk, where you will be given a receipt signed by an official. A staff member from the fire department will then go to the site for an inspection. If the inspection is successful, an order will be issued; if not, suggestions for improvements will be given along with an explanation of why. You must carry out those improvements before applying for another inspection, until the approval is granted