Thread Content
Recently, the company assigned the task of investigating violations of regulations. How should such violations be investigated in the coking workshop and the chemical production workshop? Sea friends, please give some suggestions!
First, clarify the concept of the three violations. The three violations refer to giving illegal instructions, carrying out illegal operations, and violating labor discipline. Then just look it up based on the content, right? Failing to follow the procedures constitutes improper operation, while leaving one’s post, dozing off at work, or smoking in areas where smoking is prohibited are violations of labor discipline.
Illegal behaviors such as leaving one’s post, dozing off at work, smoking in no-smoking areas, going to work under the influence of alcohol, and frequently changing posts have almost disappeared; as a result, it’s difficult to detect them. And when trying to identify violations of operating procedures, there’s no clue where to start! :(I wonder if any of you colleagues have details regarding the violations of operating procedures in the coking workshop and the chemical production workshop?)
For example: 1. Before pushing out the coke, open the furnace lid in advance, but not more than 3 times – was this done? 2. The time the door remains open after it is removed by the coke car driver must not exceed 7 minutes. Was this complied with? (Certainly, this does not apply to cleaning the graphite or refilling the furnace.) 3. The temperature monitor may open no more than 6 fire viewing covers. ……
Rating those who help you is the greatest form of gratitude. Many, many – there are too many to count. 1. A fire work permit is required for hot work – has it been obtained? 2. Gloves are prohibited when using a sledgehammer or a grinder ; 3. Before starting the four major types of vehicles, sound the horn first. 4. When performing maintenance, is the warning sign in place? 5. When entering a gas area, do you have an alarm with you? 6. Are there any instances of operators operating the electrical cabinets without authorization? …………………………