【Help needed】Steam, condensate, hot water
Thread Content
Valves, flanges, pipes, elbows, welds, and so on often leak – does anyone have any experience to share? Thank you
During the commissioning of steam pipes, thermal tightening is required; if the temperatures of condensate and hot water change frequently, bolts should be used along with spring washers
If there is a leak, replace it or take it back to the manufacturer for repair. Leaks can occur after using just one or two of these items; regular maintenance will help prevent such issues
Steam pipes? What are the specifications for condensate water?
First, check at the source whether the material grades selected during design meet the requirements, and then verify whether the quality of the valves and pipelines purchased meets the standards and whether they are installed correctly. Additionally, it is necessary to check whether a hydrostatic test was carried out as required after installation, and whether the flexibility of the thermal pipelines is sufficient.
It mainly depends on the specific operating conditions – factors such as operating pressure, temperature, the type of medium, and the surrounding environment come into play. It is necessary to check whether the selected flanges, elbows, tees, valves, etc., meet the requirements regarding material, pressure, and temperature. If they do meet these requirements, then it’s necessary to determine whether the damage is normal. Choosing the right material and pressure level is closely related to the actual operating temperature and other factors
Installation quality: Conduct a hydrostatic test; if there are product issues, contact the supplier