What is the typical value when the flow rate of the hydrocracking feed oil is at low-low level?
Thread Content
What is the typical value when the flow rate of the hydrocracking feed oil is at low-low level? Normal: 100%, elasticity: 60%~110%. What is the typical value for the low low hydrogen mixture flow rate at the compressor outlet? Please ask an experienced expert for an answer, thank you!
I checked the next model of unit with a processing capacity of 1.2 million tons per year; its normal capacity is 144 T/H, while the minimum capacity is 32 T/H. Isn’t this included in your operating procedures?
If possible, check the device specifications for your unit; all the information is there, and it is specific to that device.
It’s available on the SIS chain; you can take a look
That low flow rate is generally the minimum flow rate of large pumps, but it is now also set as the lowest load for the device.