What standards should be followed for the design requirements of non-destructive testing of static equipment?
Thread Content
Such as atmospheric-pressure containers, negative-pressure containers, water tanks, etc
You decide the design; what should be used as a reference?
NB/T47013 \"Non-destructive testing of pressure equipment\"
It is determined in accordance with the relevant design standards, and since you are the designer, you have freedom to express your creativity, but you must not violate those standards; for example, regulations regarding non-destructive testing are specified in 150.4 and 20584. Moreover, through long-term practice, design institutes typically develop their own set of requirements for non-destructive testing; as long as these requirements are met, the quality of the equipment is ensured.
What is the relationship between this standard and JB/T 4730?
The requirements for non-destructive testing are determined by the standards according to which something is designed.
I haven’t seen any standard regulations in this regard, so I’m asking everyone what standards are being followed
Old and new standards: 47013 replaces 4730
NB/T47013 series standards
If it is a pressure vessel, follow GB150; if it is at normal pressure, follow NB/T47003; for storage tanks at normal pressure, follow GB50341, and so on. What do you want to design?
I have listed a few above; take a look at what specifications are used for each