Small hydrogen compressor
Thread Content
The pressure is to be increased from 0.5 to 2.5 MPa (G); the floor space does not need to be large. Please suggest options.
As a supplementary note, the flow rate is around 800 Nm3/h.
A 2D6.5 model that can be built as a single unit is possible, with an area of approximately 6*3 meters
For such operating conditions, V-type or W-type oil-free piston compressors are recommended. Many manufacturers in China produce them; well-established ones include Chongqing Gas Compressor Factory, for example
The import value is estimated to be around 300,000 dollars
For the 2D3.5 model, a 75KW motor is selected, with an area requirement of 6 meters * 3 meters
Shenmu has the best performance, but its price might be a bit higher. Also, do you plan to use turbines for drive or motors? The modular version can help save on infrastructure costs and floor space
How much does Shen Gu require? Electric motor
If there is a stable steam supply, using a turbine for propulsion can help reduce operating costs; of course, other factors such as specific operating conditions also need to be taken into account, and each case should be analyzed on its own. It cannot be said that turbine drive is more suitable than motor drive.