Circulating water treatment agents
Thread Content
When treating circulating water, which chemicals should be used when the concentration is 4 times or higher?
This post was last edited by CoCo070563 on 2016-12-27 at 14:19; we use the one from Xuzhou
It depends on the water quality; if the water can be concentrated by 4 times on its own, there is no need to choose a specific chemical. If the water has to be forced to be concentrated by 4 times, then it’s no longer a matter of choosing a chemical, but rather selecting a treatment method.
1. Enhance the side filtration effect. 2. Use chemicals with good scale-inhibition properties
It is recommended that the poster list the quality of water used for replenishing the circulating system in their factory; in addition, information on the circulation volume, amount of water stored, temperature difference, the medium being cooled, and the material of the heat exchanger should also be provided. Maybe everyone can give you some advice.
If phosphorus is not a concern, choose phosphates as they are cost-effective
We have now contacted a client who needs a 7-fold concentration; by using our equipment, chemicals can be completely replaced. Feel free to contact us at dj122927@163.com