Device Inspection Song

Thread Content

To ensure the proper operation of inspection equipment, routine inspections are a vital tool. Mark the route with a clock, and listening, touching, and checking are key. Heating furnace, open flame; oil and pressure levels must be monitored. Control the three doors and one panel properly; the oil tank level is essential. The furnace is well-lit, highly energy-efficient, has high steam pressure, and the flame drifts. The furnace tubes are straight with no spots; the efficiency of the furnace can be determined by the exhaust smoke. Check the liquid level in containers and towers; pressure and temperature must also be verified. Stop for inspection during cold exchange; the head flanges are prone to leakage. The unit’s pumps are particularly important, as they are used to transport the medium materials. Keep flow and pressure in mind; focus inspections on vibration. The lubricant must be transparent; neither too much nor too little of it is allowed. Cooling water: keep it unobstructed, and save energy even in the smallest details. Touch the motor with the back of your hand; the current reading must be within the specified range. When shutting down the pump, turn it by hand and keep it in good condition as a spare. Detect leaks early and address them promptly to eliminate potential hazards. Fire-fighting facilities must be complete to ensure safety in the event of accidents. Original post address: https://bbs.hcbbs.com/forum.php?mod=viewthread&tid=1332549 Author: Ma Boyou Recommender: liaifeng Reason for recommendation: The summary is thorough, easy to remember, simple to learn and understand, and comprehensive in detail.