Thread Content
Article source: http://www.safety-barrier.net/news/116.html More and more people are choosing MTL isolation barriers, as they can effectively separate the circuit signals from the hazardous area from those from the safe area. It also simplifies the installation of intrinsically safe explosion-proof systems, as an intrinsically safe grounding system is not required in such systems. It can also enhance the anti-interference capability of the detection and control circuits, improving the reliability of the system. The MTL isolation barrier has strong signal processing capabilities. It provides a more convenient, reasonable, and effective solution for the application in field instruments and control systems. When the user applies both DSC and ESD simultaneously, the two systems can be effectively isolated from each other so that they do not affect one another. The loop-powered isolated safety barrier retains the advantages of the source-isolated safety barrier; it does not require an additional 24V power supply and is suitable for DCS systems that are powered directly by 0/1 cards. The MTL isolated version has many protection circuitry features to prevent damage in unexpected situations. The MTL isolation barrier allows for the maintenance of field instruments while they are still powered, thereby reducing project preparation time. On-site instruments can be grounded; non-isolated instruments can be used, offering flexible application. The MTL isolation barrier transmits digital signals to the hazardous area. Sensors or mechanical contacts that comply with the EN60947-5-6 standard (NAMUR) can be used as transmitters. The control circuit has a circuit breaker monitoring function. The K series intrinsically safe isolation barriers among them are mounted using DIN rails, and their flexibility and convenience have led to their wide adoption. The MTL isolation barrier intrinsically safe barrier can be plugged into the power rail assembled with DIN rails, making it simple and easy to use. Compared to installation using DIN rails, this installation method significantly saves on the power cables and wiring at the module’s power supply side. For rack-mounted safety barriers, PEPPERL+FUCHS offers the full range of E-series Eurocard safety barriers. There are 3 Ouka products available for selection. The intrinsically safe safety barriers of the H series are mounted using a motherboard system. This innovative product is an ideal solution for integrating with various DCS systems or for system integration. EMY-MTL Safety Barrier official website: http://www.safety-barrier.net/ Phone: 027-87263542 Mobile: 18372021864 QQ: 1763639853 Address: 18A1, Building C, China Construction Plaza, Wuchang District, Wuhan Email: sales@whaimuyi.com