Thread Content
What is the correct orientation for a boat-shaped switch device, and how should the device be positioned? There is also a certain consideration regarding the orientation when switching the device’s hull shape; an inappropriate device is likely to affect daily life at home. 1. The height of switchgear of this boat type is generally 1.4 meters above the ground, and all such units should be at the same height; the difference between them must not exceed 5 mm ； 2. The boat-shaped switch near the door is generally located on the right side of the door, not on the back side of it ； 3. When several boat-shaped switches are installed side by side or there are multiple switches, it is necessary to align the position of the control device with the position of the functional components of each switch; for example, the leftmost boat-shaped switch is used to control the device that is located farthest to the left ； 4. Necessary boat-shaped switches can be installed at a height of 0.5 meters above wall-mounted desks or nightstands, allowing users to control indoor electrical appliances without having to set sail ； 5. In kitchens, bathrooms, and rooftops, switchgear should be placed as far away as possible from areas where water is used. If it is placed close by, a switch and a splash guard should be added. Lecture 2: Placement of power sockets – Rules for socket placement: 1. The lower edge of ordinary sockets should be at a height of 0.3 meters above the ground, and they should all be installed at the same height, with a difference of no more than 5 mm ； 2. In each wall of the living room and bedrooms, the distance between two sockets should not exceed 2.5 meters; within a radius of 0.6 meters from wall corners, at least one additional socket must be provided ； 3. The socket for the washing machine should be installed at a height of 1.2 to 1.5 meters above the ground; it is best to use a three-prong socket with a switch ； 4. The refrigerator socket should be at a height of 0.3 meters or 1.5 meters above the ground (depending on the position of the refrigerator), and it is advisable to use a single three-pole socket ； 5. For split-type and wall-mounted air conditioner sockets, they should be installed at a height of 1.8 meters above the ground, based on the location of the holes provided for the wiring tubes. Window-type air conditioner sockets can be placed beside the window at a height of 1.4 meters above the ground, while power sockets for cabinet-type air conditioners should be installed at a height of 0.3 meters above the ground at the appropriate location.