One question per week: Reasons for fluctuations in the liquid level of Tower 1 in the hypothyroidism treatment plant before it starts operating
Thread Content
This post was last edited by z880347730 on 2010-12-1 20:13. As the title suggests, please share whether your plants experience the above issues when low methane operation is in use 【Due to limited time, I am unable to provide one question per day; please understand.】
Hehe, then I suggest one question per week :)
This situation has occurred, accompanied by fluctuations in pressure difference. The main reasons for this are that the flow from section one to section two, and from section two to section three, often suffers from poor flow due to the formation of air blocks within the heat exchanger, resulting in liquid accumulating on the collection tray； Another reason is that before driving the system, the amount of gas entering the tower is too low, which leads to liquid leakage from the tower plates and other issues
During intake, the volume of gas is high, which increases the liquid holdup on the tray; as a result, there is a temporary interruption in flow or a reduced flow rate. The gas enters the outlet pipe, creating a gas blockage. When the liquid level rises, it pushes the gas out, and the liquid level returns to stability.
The first possibility mentioned on the 3rd floor and what was said on the 4th floor make sense! It must be the correct answer!