Valve installation distance
Thread Content
Is there a minimum distance requirement when installing valves? What are the specific requirements? I see such a note on the unit’s drawings; I would appreciate your guidance, thank you!
The minimum installation distance for valves is generally determined based on the requirements of the process.
As mentioned above, it should be done according to the manufacturing process; ultimately, it depends on the actual circumstances
The valve shown in the diagram is an instrument valve; this is required by the process specifications, and it differs from the general rules for pipelines. Pipelines are usually designed with the minimum number of connections possible, in order to reduce the number of welds
What medium is used here? Have anti-coagulation, anti-clogging, or anti-accumulation measures been considered?~~
It is generally determined based on the requirements of the manufacturing process. It also takes into account ease of operation and maintenance.
What are the general requirements? Could you give an example? Thank you
Hard acids do have the potential to solidify
Under what circumstances is such consideration generally given in terms of manufacturing processes? Could you be more specific? Thank you
The principle is that the handwheels should not interfere with each other.