Who knows how it works!
Thread Content
Use purified air as the power source!
Jet pump? A vacuum is created using air jet injection to suck in and mix other media~~
At first glance, this device might be mistaken for a sensor. I’ve never seen it, but from the pictures, the inner surface of the pipe fitting should be fully welded through; in the images, only single-sided welding is shown, with incomplete penetration.
Judging from its appearance, it seems to be a ejector; inside it there is a Venturi tube. The motive fluid flows at high speed, and at the point where the cross-sectional area of the Venturi is smallest, a low-pressure (or negative pressure) zone is created, which draws in the material to be mixed and brings it into the container. That’s why it is also called an ejector pump.
I’ve learned something new; I don’t know what it is
I feel the same way; I think it’s probably some kind of flame detector, with the cleaning air serving to blow and protect the sensor
It shouldn’t be a jet pump; it’s a pneumatic device. There should be a gearbox on the outside, and the part that extends into the tank should be able to rotate
Does it still need to have blades inside? One mounted on the side, a pneumatic mixer
Both the inlet and outlet of a venturi tube are conical; the outlet should be flared, while the part ahead of it is pointed