How to select an individual pipe rack with a width of 2 meters?
Thread Content
I’ve just started working with pipelines, and I want to know what kind of pipe support is suitable for a pipe frame that is 2 meters wide and 4.5 meters high. How should the dimensions of various components be determined? Thank you for the advice.
Either a T-shaped or gate-shaped one will work; the height is only 4.5 meters. If the load is not heavy, it is recommended to use a T-shaped support. The specific cross-section of the support steel and the foundation require calculation by a structural engineer
Thank you; I just learned that generally, pipe racks over 2 meters in length can be handed over to the civil engineering team
The process piping specialty is only responsible for specifying the conditions regarding the \"height, width, and stress load of the T-shaped supports\", while the civil engineering specialty handles the design of the specific steel sections for these supports as well as their foundations; this requires input from the structural engineering team.