Issues regarding the installation locations of cable trays and process pipelines
Thread Content
For example: if the cable tray is located on the upper level of the pipe rack, an additional circulating water pipe is needed; can it be laid above the tray? Are there any guidelines? Which standard contains detailed provisions regarding the installation locations of cable trays and process pipelines? Thank you so much!
It can be installed above the cable tray; since the circulating water is non-corrosive, an isolation layer can be placed between the cable tray and the pipelines
Is it necessary to add a layer for the circulating water? How big? If it’s not very large, it’s also okay to weld a frame around it for support
Shouldn’t at least safety be a consideration? What to do if there’s a leak
The standard specifies the distance between pipes and cable trays in the presence of corrosion and thermal radiation.
Weld a diagonal brace on the outside of the pipe trench, and then the pipes can be placed there
There are no specific specifications for water pipelines; in my opinion, as long as it does not prevent the opening of the trunking boxes for wiring, it’s fine
How big is the water pipe? You can simply weld a channel steel or angle steel next to the pipe rack!