Leak prevention for valves at the bottom of stainless steel storage tanks
Thread Content
The stainless steel lye storage tank is leaking from its bottom outlet; it is suspected that corrosion of the gasket is the cause. There is still a large amount of lye in the tank, and it is estimated that it will take two weeks to stop the leakage. Do any experts have any methods for temporarily sealing it up? 1074
There are professional leak repair companies that can handle this!
Are there any leak-sealing companies for such chemical storage tanks as well?
If it is not a flammable or explosive area, a box can be made to enclose the entire flange, which is then welded shut, and glue can be poured inside the box to seal it off.
Close the valves at both ends, drain all the liquid, and replace the gasket!
Tighten the screws first to see if that stops the leak; if not, think of other solutions.
You can try replacing the gasket, and at the same time check whether there is any damage to the sealing surfaces of the valve and pipe flanges; if there is damage, it must be repaired or replaced
The catheter is then removed after being pulled, and repaired
A hoop is wrapped around the outside of the flange, with sealing material filled in between; it’s best to have a professional team handle this task
Great effort can create miracles – just use a hammer to hit the flange; don’t think I’m joking