Valve selection software

Thread Content

This post was last edited by wangnannan123 on 2021-10-20 at 15:08. Software for selecting control valves in two-state simulation: This software for selecting control valves takes into account factors such as the fluid flowing through the valve, normal flow rate, maximum flow rate, minimum flow rate, corresponding inlet and outlet pressures, inlet temperature, and maximum shut-off pressure difference, as well as leakage requirements, to assist users in carrying out the following tasks: 1) Calculating the flow coefficient Kv (or Cv), flow velocity, and noise levels； 2) Select the valve body type, structure, characteristics, and materials, etc ； 3) Select the valve actuator and calculate the maximum pressure drop at which the valve can operate properly ； 4) Select appropriate valve body and valve actuator models as well as accessories based on the manufacturer’s product information ； 5) Complete the quotation task. Features of the dual-mode simulation control valve selection software: 1. It saves time, reduces errors, and improves work efficiency in the process of valve selection, choice, and quotation ； 2. The two-state simulation control adheres to the latest IEC 60534 standard, enabling more accurate calculations of the valve flow coefficient Kv (or Cv) and noise levels ； 3. The two-state simulation control is equipped with a fluid database and various property calculation methods to determine the state and physical properties of pure and mixed fluids, such as density, viscosity, bubble point pressure, flashing, and cavitation, thereby reducing the burden on users to provide fluid property parameters and improving work efficiency ； 4. Select the actuator based on static requirements to ensure that the valve can be both fully closed and fully opened. Dual-mode simulation control also allows the selection of actuators and accessories based on dynamic requirements, meeting the timing requirements for opening and closing, and enabling the optimization of the valve’s dynamic performance ； 5. It is capable of conducting various dynamic and static simulation tests on valves, including step response, frequency response, valve resistance testing, as well as the characteristics of the valves and their performance after installation, and it generates various chart-based reports ； 6. The selected valves are placed in an actual flow circuit to conduct simulation tests on valve control, in order to avoid issues such as valves being too large or too small; the resolution of these valves is also tested to ensure that they meet the process and control requirements ； 7. By leveraging the product information provided by valve manufacturers, customized services can be offered to meet the specific requirements of equipment manufacturers ； 8. It can generate standard and customized selection reports in various formats such as Excel, PDF, and DOC. Supports Chinese, English, or bilingual Chinese-English versions.