HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

Seeking help regarding internal leakage in the liquid chlorine evaporator

2020-08-06View Original

Thread Content

Experts, regarding the situation where a leak is detected in a liquid chlorine evaporator (tubular type), how can the faulty equipment be dealt with quickly and scientifically? Should the water in the shell side be discharged first, or should the remaining liquid chlorine in the evaporator be sent directly to the nitrogen trichloride storage tank via the bottom flow? Please give your experts some advice; thank you
Reply #22020-08-07
Hot water as a heating medium? The latter is better, right?
Reply #32020-08-11
It’s necessary to deal with the liquid chlorine in the evaporator first. The capacity of the nitrogen trichloride storage tank is likely not very large; if there is little liquid chlorine left in the evaporator, it can be considered for discharge into the nitrogen trichloride storage tank. Otherwise, neutralization and absorption should be considered as alternatives
Reply #42020-08-11
It’s necessary to deal with the liquid chlorine in the evaporator first. The capacity of the nitrogen trichloride storage tank is likely not very large; if there is little liquid chlorine left in the evaporator, it can be considered for discharge into the nitrogen trichloride storage tank. Otherwise, neutralization and absorption should be considered as alternatives
Reply #52020-08-26
Nitrogen trichloride has a higher density than water; after the discharge valve is opened, it is neutralized with caustic soda.
Reply #62020-08-26
The main concern is that liquid chlorine and water in the tubes and bottom caps might react, leading to more serious consequences
Reply #72020-08-26
The main concern is that liquid chlorine and water in the tubes and bottom caps might react, leading to more serious consequences
Reply #82020-08-26
Thank you. Mainly, I’m worried that if liquid chlorine is released, the hot water inside the shell side could enter the evaporator tubes through leaks and react with the liquid chlorine, thereby damaging the equipment
Reply #92020-09-11
However, discharging waste first will allow the water in the shell side to enter the liquid chlorine in the tube side through the leaks in the tubes.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.